Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

15" Triple-Zone Crash/Ride on Roland TD-15

Wiring, module settings, and tips for the 15" Triple-Zone Crash/Ride when used with the Roland TD-15.

Setup — 15" Triple-Zone Crash/Ride on Roland TD-15

Works

Yes — the 15" Triple-Zone Crash/Ride works as a full 3-zone ride on the Roland TD-15: bow + bell + edge.

Bell Bow Edge

Wiring: RIDE + RIDE BELL connectors on the DB-25 cable snake → Ride 1 + Ride 2

Full 3-zone ride with separate RIDE and RIDE BELL inputs via the cable snake.

Ride setup and troubleshooting guide ›

Cable routing

  1. Plug the RIDE connector on the DB-25 cable snake into the cymbal's Ride 1 output (bow/edge).
  2. Plug the RIDE BELL connector on the DB-25 cable snake into the cymbal's Ride 2 output (bell).
Ride setup and troubleshooting guide ›

Module settings

  1. In the DRUM KIT screen, press [MENU], scroll to the SYSTEM icon, press [F3] (SYSTEM), select "Pad Settings", then press [F3] (ENTER).
  2. Press [F1] (TYPE), then strike the ride to select its input.
  3. Turn the value dial to set Pad Type to CY-13R or CY-15R.
  4. Press [F2] (BASIC) and set Sensitivity and Threshold for the ride.

Tips

  1. Both leads are required for full 3-zone operation (bell, bow, edge).
  2. If only one lead is connected, the ride will function as 2-zone only.
  3. If the edge and bell sounds come out swapped, follow the bell and edge section of the ride setup guide.
15" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

Lekato

Millenium

NUX

Pearl

Roland

Simmons

Yamaha

Support contact

Have a question? Read the FAQ. Need manual help? Email support.