Support
15" Triple-Zone Crash/Ride on Donner DED-300X
Setup — 15" Triple-Zone Crash/Ride on Donner DED-300X
Use as 2-zone rideYes — the 15" Triple-Zone Crash/Ride works on the Donner DED-300X as a 2-zone ride: bow + edge.
Choose your ride zones
Plug: Ride 1
Wiring: 1× TRS: Ride 1 (bow/edge) → RIDE lead on the signal-connection harness
Plug the Lemon ride's Ride 1 cable into the Ride input for bow + edge — no cymbal modification. The DED-300X has a single Ride input, so two of the Lemon ride's zones reach the module.
Cable routing
- Connect a single 1/4" TRS cable from the cymbal's Ride 1 output (bow/edge) to the RIDE lead on the module's signal-connection harness (the harness plugs into the module via its multi-pin parallel-port connector).
Module settings
- MENU > SENSITIVITY > select RD (the ride) > set SEN (drum sensitivity, 01-06), THREH. (trigger threshold, 01-32), XTALK (crosstalk threshold, 01-32), RETR. (repeat trigger, 01-32), and VOL (volume, 00-127) — SEN sets the sensitivity of the whole pad, bow and edge together.
- Assign the sounds per zone in MENU > PAD SET — a ride-bow voice on the bow, a ride-edge or crash voice on the second zone.
- Press SAVE to store the settings to the current PRESET.
Tips
- This is the out-of-the-box setup — no cymbal modification.
Or set it up as Bow + bell
Plug: Ride 2
Wiring: 1× TRS: Ride 2 (bow/bell, after the rewire) → RIDE lead on the signal-connection harness
After the one-time cymbal rewire the Ride 2 cable carries bow + bell into the single Ride input.
Rewire guide ›Cable routing
- Rewire the cymbal — move the internal red/black jumper from the Ride 1 input to the Ride 2 input.
- Connect a single 1/4" TRS cable from the cymbal's Ride 2 output to the RIDE lead on this module's signal-connection harness.
Module settings
- MENU > SENSITIVITY > select RD (the ride) > set SEN (drum sensitivity, 01-06), THREH. (trigger threshold, 01-32), XTALK (crosstalk threshold, 01-32), RETR. (repeat trigger, 01-32), and VOL (volume, 00-127) — SEN sets the sensitivity of the whole pad, bow and bell together.
- Assign the sounds per zone in MENU > PAD SET — a ride-bow voice on the bow, a ride-bell voice on the second zone.
- Press SAVE to store the settings to the current PRESET.
15" Triple-Zone Crash/Ride also fits 74 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71