Official US store. Free fast shipping from US
Lemon

Support

15" Triple-Zone Crash/Ride on Alesis Strike MultiPad

Wiring, module settings, and tips for the 15" Triple-Zone Crash/Ride when used with the Alesis Strike MultiPad.

Setup — 15" Triple-Zone Crash/Ride on Alesis Strike MultiPad

Use as 2-zone ride

The 15" Triple-Zone Crash/Ride works on your Alesis Strike MultiPad with reduced zones.

Bell Bow Edge

Wiring: 1× TRS from the ride's bow+bell output (post-rewire) → Trigger In 2/3 or 4/5 set to Head+Rim — bow + bell

The Strike Multipad's dual-zone trigger jacks are 2-zone only (Head+Rim) — there is no 3-zone ride mode, so the Lemon 3-zone ride drives two of its three zones here. A one-time, reversible internal jumper move (~10 min) routes bow + bell to a single TRS cable for a Head+Rim jack; the edge zone is not read.

Rewire guide ›

Cable routing

  1. Rewire the ride — move the internal red/black jumper so bow + bell share one output (see the rewire guide).
  2. Connect a single 1/4" TRS cable from that output to a free dual-zone jack (Trigger In 2/3 or 4/5) set to Head+Rim.
Rewire guide ›

Module settings

  1. Press [Trigger], select the trigger input (TRIN2–5) and set Type to Head+Rim.
  2. Tune Sensitivity, Scan Time and Retrig-C, and set Rim Gain for the bell zone.
  3. Assign a ride-bow sample to the head and a ride-bell sample to the rim.

Tips

  1. Bow plays on the head zone, bell on the rim zone.
  2. The edge/crash zone of a 3-zone ride is not available on the Strike Multipad's 2-zone inputs.
15" Triple-Zone Crash/Ride also fits 70 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

Pearl

Roland

Simmons

Yamaha

Support contact

Have a question? Read the FAQ. Need manual help? Email support.