Support
20" Triple-Zone Crash/Ride on Millenium MPS-1000
Setup — 20" Triple-Zone Crash/Ride on Millenium MPS-1000
Use as 2-zone rideYes — the 20" Triple-Zone Crash/Ride works on the Millenium MPS-1000 as a 2-zone ride: bow + edge.
Choose your ride zones
Plug: Ride 1
Wiring: Ride plug on the multiple cable → Ride 1 (bow/edge)
Plug the ride plug into the Lemon ride's Ride 1 output for bow + edge — no cymbal modification. The MPS-1000 reads three ride zones, but only from its own single-cable ride design: the multiple cable has one ride connection, so two of the Lemon ride's zones reach the module.
Ride setup and troubleshooting guide ›Cable routing
- Plug the multiple cable's labelled ride plug into the cymbal's Ride 1 output (bow/edge).
Module settings
- Press [SETUP], select 'ADVANCE' and press [ENTER], then hit the ride to select it; set 'SENSITIVITY', 'HEADROOM' and 'PEAK DECAY', and balance the edge with 'RIM VELOCITY' and 'RIM MODIFIER'.
- If an edge hit plays a bell sound, press [EDIT], hit the edge so the module shows which ride trigger it fired, and set that trigger's 'VOICE' to a ride-edge sound.
Tips
- This is the out-of-the-box setup — no cymbal modification.
- Ride MIDI notes on this module: bow = 51, bell = 53, edge = 59.
Or set it up as Bow + bell
Plug: Ride 2
Wiring: Ride plug on the multiple cable → Ride 2 (bow/bell, after the rewire)
After the one-time cymbal rewire Ride 2 carries bow + bell into the multiple cable's single ride connection. The MPS-1000 has ride-bell sounds to assign to the second zone.
Rewire guide ›Cable routing
- Rewire the cymbal — move the internal red/black jumper from the Ride 1 input to the Ride 2 input.
- Plug the multiple cable's labelled ride plug into the cymbal's Ride 2 output.
Module settings
- Press [SETUP], select 'ADVANCE' and press [ENTER], then hit the ride to select it; set 'SENSITIVITY', 'HEADROOM' and 'PEAK DECAY', and balance the bell with 'RIM VELOCITY' and 'RIM MODIFIER'.
- If a bell hit plays an edge sound, press [EDIT], hit the bell so the module shows which ride trigger it fired, and set that trigger's 'VOICE' to a ride-bell sound.
Tips
- Ride MIDI notes on this module: bow = 51, bell = 53, edge = 59.
20" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71