Support
20" Triple-Zone Crash/Ride on Alesis Strata Core
Setup — 20" Triple-Zone Crash/Ride on Alesis Strata Core
WorksYes — the 20" Triple-Zone Crash/Ride works as a full 3-zone ride on the Alesis Strata Core: bow + bell + edge.
Bell
Bow
Edge
Wiring: 2× TRS → R (Ride) on the cable snake + a free Cymbal input — bow/edge + bow/bell
The Strata Core has a dedicated native 3-zone Ride slot — bow, bell, and edge each trigger independently, with choke on the edge. The Lemon 3-zone ride is dual-output (two signal lines), so it lands on the R (Ride) input for bow/edge plus one free Cymbal input for the bell.
Cable routing
- Connect a 1/4" TRS cable from the cymbal's Ride 1 output (bow/edge) to the R (Ride) trigger on the cable snake.
- Connect a second 1/4" TRS cable from the cymbal's Ride 2 output (bow/bell) to a free Cymbal input — C1/C2 on the cable snake, or the Cymbal 3 (C3) jack on the rear panel.
Module settings
- Press the Kit button, then tap Trigger to open Trigger Mode.
- Tap Hit Select and strike the ride bow to select the R slot, then load the matching ride trigger preset and open Tweaks to set Bow Sensitivity, Edge Sensitivity, and Threshold.
- Use Hit Select to select the Cymbal input carrying the bell, assign a ride-bell instrument to it in Kit Edit, and tune its Bow/Edge Sensitivity and Threshold independently.
Tips
- Bow and edge play through the R input; the bell plays through the Cymbal input — grabbing the edge chokes the ride.
- If bell and edge feel reversed on either input, toggle Invert Bell & Edge in Advanced.
- If late cymbal swing causes false triggers, raise Edge Decay Boost (0–100) in Advanced.
- If the ride and bell inputs interfere, run Learn XTalk on the input causing the crosstalk.
- If bow strikes also sound a second voice through the Cymbal input carrying the bell, silence that input's bow zone instrument.
20" Triple-Zone Crash/Ride also fits 74 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71