Official US store Free shipping Bundle & Save up to 20%
Lemon

Support

20" Triple-Zone Crash/Ride on 2Box DrumIt 5 MKII

Wiring, module settings, and tips for the 20" Triple-Zone Crash/Ride when used with the 2Box DrumIt 5 MKII.

Setup — 20" Triple-Zone Crash/Ride on 2Box DrumIt 5 MKII

Works

Yes — the 20" Triple-Zone Crash/Ride works as a full 3-zone ride on the 2Box DrumIt 5 MKII: bow + bell + edge.

Bell Bow Edge

Wiring: 2× TRS: bow/edge → CYMB A jack, bow/bell → the paired CYMB B jack (e.g. CYMB 3A + CYMB 3B)

Full 3-zone ride (bow, bell, edge). Like the DrumIt Three, the DrumIt 5 MKII pairs each CYMB channel's A jack (bow tip + edge ring) with a B jack the manual reserves for a dedicated bell-trigger cable on ride cymbals. The Lemon ride's two cables map straight across.

Cable routing

  1. Pick a free CYMB channel (CYMB 1–3). Connect the ride's Ride 1 output (bow/edge) to that channel's A jack.
  2. Connect the ride's Ride 2 output (bow/bell) to the same channel's B jack.

Module settings

  1. On the UNIT-TRIG page, select the CYMB channel you used and set TYPE to CyPSB — the Roland-style piezo/switch cymbal type that matches the Lemon ride.
  2. Adjust GAIN, THRES, XTALK, and CURVE so bow, edge, and bell strikes register consistently.
  3. Set the bell gain separately: hold MORE and press the DATA knob to switch the GAIN reading to the bell zone (L/M/H).

Tips

  1. All trigger inputs are balanced — use stereo (TRS) cables on both the A and B jacks.
  2. If edge strikes play the bell sound (or vice versa), swap the A and B cables.
  3. Choke works by grabbing the ride edge.
20" Triple-Zone Crash/Ride also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

NUX

Pearl

Roland

Simmons

Yamaha

Support contact

Have a question? Read the FAQ. Need manual help? Email support.