Support
20" Triple-Zone Crash/Ride on Efnote 3
Setup — 20" Triple-Zone Crash/Ride on Efnote 3
Use as 2-zone rideYes — the 20" Triple-Zone Crash/Ride works on the Efnote 3 as a 2-zone ride: bow + edge.
Choose your ride zones
Plug: Ride 1
Wiring: 1× TRS: Ride 1 (bow/edge) → RIDE input
Plug the Lemon ride's Ride 1 cable into the RIDE input for bow + edge — no cymbal modification. Edge is the EFNOTE 3's native second ride zone, so it reads straight away.
Cable routing
- Connect the ride's Ride 1 output (bow/edge) to the RIDE input — the RIDE cable on the multi-cable harness.
Module settings
- Assign a ride-bow tone to zone A and a ride-edge tone to zone B via ZONE EDIT > TONE.
- Adjust Sens and Threshold until bow and edge strikes register cleanly.
Tips
- This is the out-of-the-box setup — no cymbal modification.
- The harness's separate RIDE CUP cable is not used in this configuration.
Or set it up as Bow + bell
Plug: Ride 2
Wiring: 1× TRS: Ride 2 (bow/bell, after the rewire) → RIDE input
After the one-time reversible cymbal rewire the Ride 2 cable carries bow + bell into the same RIDE input. The EFNOTE 3 has its own ride cup voice, so assign that tone to the second zone and bell hits play a bell.
Rewire guide ›Cable routing
- Rewire the cymbal — move the internal jumper from Ride 1 to Ride 2 (see the rewire guide).
- Connect the ride's Ride 2 output to the RIDE input, in place of the Ride 1 cable.
Module settings
- Assign a ride-bow tone to zone A via ZONE EDIT > TONE.
- Assign the ride cup tone to zone B via ZONE EDIT > TONE — that is the zone the rewired Ride 2 cable's bell lands on.
- Adjust Sens and Threshold until bow and bell strikes register cleanly.
Tips
- Both configs feed the same RIDE input — run bow + edge or bow + bell, not both at once.
- The rewire is reversible: move the jumper back to Ride 1 for bow + edge.
20" Triple-Zone Crash/Ride also fits 73 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71