Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

20" Triple-Zone Crash/Ride on Alesis DM10 MKII

Wiring, module settings, and tips for the 20" Triple-Zone Crash/Ride when used with the Alesis DM10 MKII.

Setup — 20" Triple-Zone Crash/Ride on Alesis DM10 MKII

Use as 2-zone ride

Yes — the 20" Triple-Zone Crash/Ride works on the Alesis DM10 MKII as a 2-zone ride: bow + edge.

Choose your ride zones

Plug: Ride 1

Wiring: RIDE connector on the DB-25 cable snake → Ride 1 (bow/edge)

Plug the RIDE connector into the Lemon ride's Ride 1 output for bow + edge — no cymbal modification.

Ride setup and troubleshooting guide ›

Cable routing

  1. Plug the RIDE connector on the DB-25 cable snake into the ride's Ride 1 output (bow/edge).
Ride setup and troubleshooting guide ›

Module settings

  1. Press Trigger to enter the Trigger Interface, then select the RIDE input.
  2. Adjust Threshold, Head Sensitivity, Rim Sens, and Curve until bow and edge strikes register cleanly.
  3. Assign the sounds per zone: Kit → F2-Edit → F1-Voice, strike the zone, then set Voice Number — a ride-bow voice on the bow, a ride-edge or crash voice on the second zone.
  4. Press F3-Save to keep the settings — otherwise they are lost when you power off the module.

Tips

  1. This is the out-of-the-box setup — no cymbal modification.

Or set it up as Bow + bell

Plug: Ride 2

Wiring: RIDE connector on the DB-25 cable snake → Ride 2 (bow/bell, after the rewire)

After the one-time, reversible jumper move inside the cymbal (~10 min), Ride 2 carries bow + bell.

Rewire guide ›

Cable routing

  1. Rewire the cymbal — move the internal red/black jumper from the Ride 1 input to the Ride 2 input.
  2. Plug the RIDE connector on the DB-25 cable snake into the cymbal's Ride 2 output.
Rewire guide ›

Module settings

  1. Press Trigger to enter the Trigger Interface, then select the RIDE input.
  2. Adjust Threshold, Head Sensitivity, Rim Sens, and Curve until bow and bell strikes register cleanly.
  3. Assign the sounds per zone: Kit → F2-Edit → F1-Voice, strike the zone, then set Voice Number — a ride-bow voice on the bow, a ride-bell voice on the second zone.
  4. Press F3-Save to keep the settings — otherwise they are lost when you power off the module.

Tips

  1. The module still labels that second zone as the rim/edge zone — the label is cosmetic, the voice you assign to it is what you hear.
20" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

Lekato

Millenium

NUX

Pearl

Roland

Simmons

Yamaha

Support contact

Have a question? Read the FAQ. Need manual help? Email support.