Support

T950 10"x5" High Tom on Simmons SD1200

Wiring, module settings, and tips for the T950 10"x5" High Tom when used with the Simmons SD1200.

Yes — the T950 10"x5" High Tom works as a full tom on the Simmons SD1200: head + rim.

Head Rim

Wiring: 1× TRS per tom → the TOM1/TOM2/TOM3 leads of the multi-pin cable harness (a fourth tom uses the side-panel Tom 4 jack)

The tom inputs are dual-zone (head + rim): the module's note chart gives each tom a head note and a rim note.

Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 lead of the multi-pin cable harness.
A fourth tom uses the Tom 4 stereo 1/4" input on the module's right side panel.

Go to Utility > Trigger and select the Tom pad, then adjust Sensitivity, Threshold, Curve, Retrigger, and Crosstalk.

Head triggers from the center piezo, rim from a second piezo on the ring.
Both zones respond independently on the TRS connection (tip = head, ring = rim).

T950 10"x5" High Tom also fits 74 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.