Support
T950 10"x5" High Tom on Simmons Titan 50
Setup — T950 10"x5" High Tom on Simmons Titan 50
WorksYes — the T950 10"x5" High Tom works as a full tom on the Simmons Titan 50: head + rim.
Head
Rim
Wiring: 1× TRS per tom → the "To Tom 1"–"To Tom 3" branches of the multi-pin cable harness
The Titan 50's tom inputs are dual-zone, even though the kit's stock 8" tom pads are single-zone. A Lemon dual-zone tom pad triggers both head (center piezo) and rim (a second piezo on the ring) once Tom Type is set to Dual.
Cable routing
- Connect a 1/4" TRS cable from each tom pad to the "To Tom 1", "To Tom 2" or "To Tom 3" branch of the multi-pin cable harness.
Module settings
- Press the SETUP button, then strike the tom to select it (the LED to the right of the display shows the selected input).
- Press SETUP repeatedly to reach Tom Type and set it to "Dual" — this is what turns the rim on. Leave the third option, "Split", alone: it splits the one TRS cable into a pair of TS cables for two separate single-zone tom pads, and no rim reads in that mode.
- Press SETUP repeatedly to step through Sens, Retrigger, Threshold, Curve, and X-Talk.
- Set Ratio to balance the rim zone against the head — a higher Ratio raises rim sensitivity.
Tips
- With Tom Type set to Dual, the head (center piezo) and rim (a second piezo on the ring) trigger as separate sounds.
- Use a TRS cable — the rim zone rides on the ring conductor, so a TS cable would drop it.
T950 10"x5" High Tom also fits 74 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71