Free Shipping on All Orders
Lemon

Support

T950 10"x5" High Tom on Roland V71

Wiring, module settings, and tips for the T950 10"x5" High Tom when used with the Roland V71.

Setup — T950 10"x5" High Tom on Roland V71

Works

The T950 10"x5" High Tom is fully supported on your Roland V71.

Head Rim

Wiring: 1× TRS per tom → TOM1, TOM2, TOM3 inputs (1/4" TRS jacks)

Dual-zone tom triggering: head (tip) and rim (ring) respond independently via the single TRS connection per tom input.

Cable routing

  1. Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 input on the rear panel.

Module settings

  1. Press [TRIGGER] > [F1] BANK.
  2. Navigate to the TOM1, TOM2, or TOM3 input.
  3. Set the trigger type to PD-85 or PD-105 depending on your pad size.

Tips

  1. Head triggers from the center piezo, rim triggers from the rim switch.
  2. Both zones respond independently on the TRS connection (tip = head, ring = rim).