Support
Setup for your Simmons SD1200
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Simmons SD1200, with the limitations noted below.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 2-zone
- Hi-hat Switch (open/closed)
Module snapshot
- Brand
- Simmons
- Model
- SD1200
- Also known as
- SD1200
Setup details by role
Snare pad 2-zone 1× TRS → the SNARE lead of the multi-pin cable harness
The snare input is dual-zone (head + rim): the module's note chart gives SNARE and SNARE RIM SHOT separate MIDI notes.
Tom pad 2-zone 1× TRS per tom → the TOM1/TOM2/TOM3 leads of the multi-pin cable harness (a fourth tom uses the side-panel Tom 4 jack)
The tom inputs are dual-zone (head + rim): the module's note chart gives each tom a head note and a rim note.
Kick pad Works 1× TS or TRS → the KICK lead of the multi-pin cable harness
Single-zone kick trigger. Only the head zone is active.
2-zone crash 2-zone 1× TRS → the CRASH1 lead of the multi-pin cable harness, or the Crash 2 jack on the right side panel
Dual-zone cymbal triggering confirmed. Manual lists Crash as Dual zone (p.5). Stock crash is a Dual Zone 12" Cymbal with choke support.
3-zone ride 2-zone 1× TRS: Ride 1 (bow/edge) → the RIDE lead of the multi-pin cable harness
Plug the Lemon ride's Ride 1 cable into the ride lead of the harness for bow + edge — no cymbal modification. The SD1200 has a single ride connection, so you get two of the ride's three zones.
Hi-hat Open/Closed 1× TRS pad + 1× TRS (controller) → the HH and HH PEDAL leads of the multi-pin cable harness
The Lemon hi-hat pad and controller connect through the multi-pin cable harness and deliver open and closed hi-hat.
