Support
T950 10"x5" High Tom on Roland TD-9
Setup — T950 10"x5" High Tom on Roland TD-9
WorksYes — the T950 10"x5" High Tom works as a full tom on the Roland TD-9: head + rim.
Head
Rim
Wiring: “T1”, “T2” and “T3” leads on the DB-25 cable snake → one per tom pad
Dual-zone tom triggering: head (tip) and rim (ring) are read over the one lead per tom input.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the “T1”, “T2” or “T3” lead on the DB-25 cable snake into each tom pad.
Module settings
- Press [SETUP], then [F1] (TRIG), then [F1] (TYPE).
- Hit a tom to select its input (or use the CURSOR buttons).
- Set "Trig Type" to PD85 or PD105 with [+/-] to match your tom.
- Press [F2] (BASIC) to fine-tune "Sensitivity" (1-32) and "Threshold" (0-31).
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T950 10"x5" High Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71