Official US store Free shipping Bundle & Save up to 20%
Lemon

Support

T950 10"x5" High Tom on Alesis Command

Wiring, module settings, and tips for the T950 10"x5" High Tom when used with the Alesis Command.

Setup — T950 10"x5" High Tom on Alesis Command

Works

Yes — the T950 10"x5" High Tom works as a full tom on the Alesis Command: head + rim.

Head Rim

Wiring: 1× TRS per tom → Tom1, Tom2, Tom3 connectors on the cable snake

The tom connectors on the cable snake support dual-zone (head + rim) triggering via center piezo and rim switch.

Cable routing

  1. Connect a 1/4" TRS cable from each tom pad to the Tom1, Tom2, or Tom3 connector on the cable snake.

Module settings

  1. Go to Kit > Menu > Trigger. Select the Tom input.
  2. Adjust Sensitivity, Threshold, Curve, and Rim Sens.
  3. Set Head-Rim Adj to balance head and rim response.

Tips

  1. Head triggers from the center piezo, rim triggers from the rim switch.
  2. Both zones respond independently on the TRS connection (tip = head, ring = rim).
T950 10"x5" High Tom also fits 73 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.