Support
T950 10"x5" High Tom on Efnote 3
Setup — T950 10"x5" High Tom on Efnote 3
WorksYes — the T950 10"x5" High Tom works as a full tom on the Efnote 3: head + rim.
Head
Rim
Wiring: TOM1, TOM2 or TOM3 leads on the MULTI-A breakout cable → one per tom pad
The tom inputs support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug a TOM1, TOM2 or TOM3 lead on the MULTI-A breakout cable into each tom pad — the module has no 1/4" trigger jacks of its own (Quickstart Guide p.10).
Module settings
- In the Trigger menu's PAD screen, select the tom Input.
- Adjust Sens and Threshold; Sens B adjusts the rim zone.
- If rim sounds trigger when you strike the head, adjust Head-Rim Border.
- Use the X-TALK ELIM. screen if hits on other pads falsely trigger this one.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- A fourth tom goes to the TOM4 lead on the MULTI-B breakout cable (Quickstart Guide p.11).
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T950 10"x5" High Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71