Support

T950 10"x5" High Tom on Roland TD-15

Wiring, module settings, and tips for the T950 10"x5" High Tom when used with the Roland TD-15.

Yes — the T950 10"x5" High Tom works as a full tom on the Roland TD-15: head + rim.

Head Rim

Wiring: 1× TRS per tom → TOM1, TOM2, TOM3 connectors on the DB-25 cable snake

Dual-zone tom triggering: head (tip) and rim (ring) respond independently via the single TRS connection per tom input.

Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 connector on the DB-25 cable snake.
Additional tom inputs may be available as direct jacks on the rear panel.

In the DRUM KIT screen, press [MENU], scroll to the SYSTEM icon, press [F3] (SYSTEM), select "Pad Settings", then press [F3] (ENTER).
Press [F1] (TYPE), then strike a tom pad to select the T1, T2, or T3 input.
Turn the value dial to set Pad Type to PD-105 or PD-85.
Press [F2] (BASIC) and set Sensitivity and Threshold for the tom.

Head triggers from the center piezo, rim triggers from the rim switch.
Both zones respond independently on the TRS connection (tip = head, ring = rim).

T950 10"x5" High Tom also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.