Support

T950 10"x5" High Tom on NUX DM-7X

Wiring, module settings, and tips for the T950 10"x5" High Tom when used with the NUX DM-7X.

Yes — the T950 10"x5" High Tom works as a full tom on the NUX DM-7X: head + rim.

Head Rim

Wiring: 1× TRS per tom → Tom 1 / Tom 2 / Tom 3 branch on the multi-pin trigger snake

Dual-zone toms: head and rim respond independently over one TRS connection per tom. A fourth tom is available on the TOM jack of the interface panel's TRIGGER IN pair, which reads head and rim like the cable's tom branches.

Cable routing

Plug each Lemon tom into the labeled TOM 1, TOM 2, or TOM 3 branch of the trigger snake.
A fourth tom can use the TOM jack of the TRIGGER IN pair on the interface panel.

Module settings

Press MENU > TRIGGER and hit a tom to select it.
Tune SENSITIVITY / THRESHOLD for the head and RIM GAIN / HEAD RIM ADJUST for the rim.

Tips

Head and rim respond independently on the single TRS cable.

T950 10"x5" High Tom also fits 74 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.