Support
T950 10"x5" High Tom on Roland TD-20
Setup — T950 10"x5" High Tom on Roland TD-20
WorksYes — the T950 10"x5" High Tom works as a full tom on the Roland TD-20: head + rim.
Head
Rim
Wiring: 1× TRS per tom → TOM1, TOM2, TOM3 inputs (1/4" TRS jacks)
Dual-zone tom triggering: head (tip) and rim (ring) respond independently via the single TRS connection per tom input.
Cable routing
- Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 input on the rear panel.
Module settings
- Press [TRIGGER], then [F1 (BANK)] to open the TRIGGER BANK screen.
- Strike a tom to select the TOM1, TOM2, or TOM3 input.
- Use [+/-] or the [VALUE] dial to set Trig Type to PD105 or PD120.
- Press [F2 (BASIC)] and set Sensitivity and Threshold for the tom.
Tips
- Head triggers from the center piezo, rim triggers from the rim switch.
- Both zones respond independently on the TRS connection (tip = head, ring = rim).
T950 10"x5" High Tom also fits 73 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71