Support

15" Triple-Zone Crash/Ride on Roland TD-15

Wiring, module settings, and tips for the 15" Triple-Zone Crash/Ride when used with the Roland TD-15.

Yes — the 15" Triple-Zone Crash/Ride works as a full 2-zone crash on the Roland TD-15: bow + edge.

Bow Edge

Wiring: 1× TRS → CRASH1 connector on the DB-25 cable snake, or CRASH2 / AUX direct jack on the rear panel

Dual-zone crash triggering: bow (tip) and edge (ring) respond independently via the single TRS connection. Choke works by grabbing the cymbal edge. The TD-15 supports Roland CY-series 2-zone cymbals.

Cable routing

Connect a ¼″ TRS cable from the cymbal to the CRASH1 connector on the DB-25 cable snake.
For additional cymbals, connect to the CRASH2 or AUX input on the rear panel.

Module settings

In the DRUM KIT screen, press [MENU], scroll to the SYSTEM icon, press [F3] (SYSTEM), select "Pad Settings", then press [F3] (ENTER).
Press [F1] (TYPE), then strike the cymbal to select its input.
Turn the value dial to set Pad Type to CY-12C or CY-14C.
Press [F2] (BASIC) and set Sensitivity and Threshold for the cymbal.

Tips

Bow and edge zones respond independently.
Choke works by grabbing the cymbal edge.
CRASH2 and AUX are direct jacks on the rear panel, not part of the cable snake.

15" Triple-Zone Crash/Ride also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.