Free Shipping on All Orders
Lemon

Support

T550 8" High Tom on Roland TD-02

Wiring, module settings, and tips for the T550 8" High Tom when used with the Roland TD-02.

Setup — T550 8" High Tom on Roland TD-02

Reduced — 1-zone toms

The T550 8" High Tom works on your Roland TD-02 with reduced zones.

Head Rim

Wiring: 1× TRS per tom → TOM1, TOM2, TOM3 connectors on the DB-25 cable snake

The Roland TD-02 tom inputs are single-zone — only the head piezo is read. Rim hits on a dual-zone tom pad will not produce a separate sound.

Cable routing

  1. Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 connector on the DB-25 cable snake.

Module settings

  1. The TD-02 has limited menu settings for trigger configuration.
  2. Navigate to the tom input and confirm the pad is detected.

Tips

  1. Head triggers from the center piezo, rim triggers from the rim switch.
  2. Both zones respond independently on the TRS connection (tip = head, ring = rim).