Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

T550 8" High Tom on Alesis Strata Core

Wiring, module settings, and tips for the T550 8" High Tom when used with the Alesis Strata Core.

Setup — T550 8" High Tom on Alesis Strata Core

Works

Yes — the T550 8" High Tom works as a full tom on the Alesis Strata Core: head + rim.

Head Rim

Wiring: T1/T2/T3 on the cable snake → one per tom pad, or 1× TRS → T4 on the Tom 4 rear-panel jack

Each Tom trigger slot is dual-zone (head + rim) with independent Head Sensitivity, Rim Sensitivity, Head Threshold, and Rim Threshold. T1–T3 land on the cable snake; T4 is one of the two dedicated 1/4" TRS jacks Alesis puts on the rear panel — "Tom 4 and Cymbal 3 Trigger Inputs (1/4" TRS)" (User Guide p.10).

Snare and tom setup and troubleshooting guide ›

Cable routing

  1. Plug the T1, T2, or T3 trigger on the cable snake into each tom pad.
  2. For a fourth tom, connect a 1/4" TRS cable from the pad to the Tom 4 (T4) trigger input on the rear panel — a dedicated 1/4" TRS jack (User Guide p.10).
Snare and tom setup and troubleshooting guide ›

Module settings

  1. Press the Kit button, then tap Trigger to open Trigger Mode.
  2. Tap Hit Select and strike the tom to select its slot (T1–T4), or tap the letters in the meter row.
  3. Load a dual-zone drum preset, then open Tweaks to set Head Sensitivity, Rim Sensitivity, Head Threshold, and Rim Threshold.

Tips

  1. Head triggers from the center piezo; rimshot and rim-only come from the rim sensor on the TRS ring.
  2. If a low-tuned mesh head favors the wrong zone, open Advanced and adjust Zone Balance (-64 to 63).
  3. On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 8" High Tom also fits 76 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.