Support
T550 8" High Tom on NUX DM-210
Setup — T550 8" High Tom on NUX DM-210
WorksYes — the T550 8" High Tom works as a full tom on the NUX DM-210: head + rim.
Head
Rim
Wiring: Tom 1 / Tom 2 / Tom 3 branch on the multi-pin trigger snake → one per tom pad
Dual-zone toms: head and rim are read over one lead per tom (the manual shows both a head shot and a rim click).
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the labeled TOM 1, TOM 2, or TOM 3 branch of the trigger snake into each Lemon tom.
Module settings
- In drum-kit mode, press the MENU button.
- Use the − / + buttons to select TRIG, then press OK.
- Hit the tom to select it as the pad to adjust.
- Press OK to step to each parameter and use − / + to set the value.
- Set SENSITIVITY and THRESHOLD for the head, and RIM GAIN / HEAD RIM ADJUST for the rim zone.
- Press MENU to return — the parameters save automatically.
Tips
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 8" High Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71