Support

T550 8" High Tom on Simmons Titan 20

Wiring, module settings, and tips for the T550 8" High Tom when used with the Simmons Titan 20.

The T550 8" High Tom works on your Simmons Titan 20 with reduced zones.

Head Rim

Wiring: 1× TRS per tom → TOM1, TOM2, TOM3 connectors on the DB-25 cable harness

The Titan 20 tom inputs are single-zone per the manual (p.6 lists toms as Single Zone). Only the head zone will trigger; rim hits will not produce a separate sound.

Cable routing

Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 connector on the DB-25 cable harness.

Module settings

MENU > TRIGGER > select Tom > adjust Sensitivity, Threshold, Crosstalk.

Tips

Only the head (center piezo) triggers — the rim switch on the pad is ignored by this module.
A TS cable also works since only the tip signal is read.