Support

T550 8" High Tom on Roland SPD-SX

Wiring, module settings, and tips for the T550 8" High Tom when used with the Roland SPD-SX.

The T550 8" High Tom is fully supported on your Roland SPD-SX.

Head Rim

Wiring: 1× TRS per tom → a TRIG IN jack (1/2 or 3/4) set to INPUT MODE HEAD&RIM — head + rim

Each 2-zone tom uses one of the two TRIG IN jacks in HEAD&RIM mode (head + rim over a single TRS cable). With only two jacks you can connect at most two 2-zone pads directly. To reach more inputs, a jack can instead run in TRIGx2 mode, where a PCS-31L Y-cable splits it into two single-zone (head-only) inputs — but rim is then unavailable on that jack.

Cable routing

Connect a 1/4" TRS cable from each Lemon tom pad to a free TRIG IN jack (1/2 or 3/4).

Module settings

Press [MENU] > SETUP > TRIG IN.
For each tom's trigger input, set INPUT MODE to HEAD&RIM.
Set TRIG TYPE to a tom profile such as PD-85 or PD-105, then adjust PAD SENS, THRESHOLD and the trigger curve.
Assign tom head and rim waves to each trigger input in the KIT PAD screen.

Tips

Only two physical jacks exist — each 2-zone tom needs its own HEAD&RIM jack.
Raise XTALK CANCEL between toms mounted on the same stand.

T550 8" High Tom also fits 70 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.