Support

20" Triple-Zone Crash/Ride on Simmons Titan 70

Wiring, module settings, and tips for the 20" Triple-Zone Crash/Ride when used with the Simmons Titan 70.

Yes — the 20" Triple-Zone Crash/Ride works as a full 2-zone crash on the Simmons Titan 70: bow + edge.

Bow Edge

Wiring: 1× TRS → EXP1 or EXP2 expansion jack (1/4" TRS) on the rear panel

Dual-zone cymbal triggering confirmed via EXP1/EXP2 expansion jacks on the rear panel. The primary crash channel on the 25-pin cable harness uses a single-zone stock 10" pad — connect Lemon 2-zone cymbals to EXP1 or EXP2 for full bow and edge support.

Cable routing

Connect a 1/4" TRS cable from the cymbal pad to the EXP1 or EXP2 expansion jack on the rear panel.

Module settings

Press the SETUP button, then strike the cymbal pad to select it (the LED at the right of the display shows which input is selected).
Press SETUP repeatedly to step through Sens, Retrigger, Threshold, Curve, and X-Talk for that input.

Tips

Use EXP1 or EXP2 for dual-zone (bow + edge) operation — not the primary crash channel on the 25-pin harness.
Choke detection may also be available depending on the pad.

20" Triple-Zone Crash/Ride also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.