Support
15" Triple-Zone Crash/Ride on Roland SPD-SX PRO
Setup — 15" Triple-Zone Crash/Ride on Roland SPD-SX PRO
WorksYes — the 15" Triple-Zone Crash/Ride works as a full 2-zone crash on the Roland SPD-SX PRO: bow + edge.
Bow
Edge
Wiring: 1× TRS → a TRIGGER IN jack set to HEAD&RIM — bow + edge
Dual-zone crash triggering: bow (tip) and edge (ring) read independently over one TRS cable when the jack is set to HEAD&RIM. The SPD-SX PRO supports Roland CY-series 2-zone cymbals. Each 2-zone cymbal occupies one of the four jacks.
Cable routing
- Connect a 1/4" TRS cable from the Lemon cymbal to a free TRIGGER IN jack (1/2, 3/4, 5/6 or 7/8).
Module settings
- Press [MENU] > SYSTEM > PAD/TRIG IN, then [F1] (PARAM), and play the cymbal to select its trigger input.
- Set Input Mode to HEAD&RIM and Trig Type to a CY-series profile such as CY-13R or CY-14C.
- In KIT EDIT1, assign bow and edge waves to the trigger's head and rim.
Tips
- Bow and edge respond independently.
- Connect a second crash to another free jack — up to four 2-zone pads fit across the four jacks.