Support
T550 10" Low Tom on NUX DM-7X
Setup — T550 10" Low Tom on NUX DM-7X
WorksYes — the T550 10" Low Tom works as a full tom on the NUX DM-7X: head + rim.
Head
Rim
Wiring: Tom 1 / Tom 2 / Tom 3 branch on the multi-pin trigger snake → one per tom pad
Dual-zone toms: head and rim are read over one lead per tom. A fourth tom is available on the TOM jack of the interface panel's TRIGGER IN pair, which reads head and rim like the cable's tom branches.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the labeled TOM 1, TOM 2, or TOM 3 branch of the trigger snake into each Lemon tom.
- A fourth tom can connect to the TOM jack of the TRIGGER IN pair on the interface panel with a 1/4" TRS cable.
Module settings
- Press MENU > TRIGGER and hit a tom to select it.
- Tune SENSITIVITY / THRESHOLD for the head and RIM GAIN / HEAD RIM ADJUST for the rim.
Tips
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 10" Low Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71