Support
13" Triple-Zone Crash/Ride on NUX DM-210
Setup — 13" Triple-Zone Crash/Ride on NUX DM-210
WorksYes — the 13" Triple-Zone Crash/Ride works as a full 2-zone crash on the NUX DM-210: bow + edge.
Bow
Edge
Wiring: Crash branch on the multi-pin trigger snake → cymbal, or 1× TRS → the module's CYMBAL trigger jack
Dual-zone crash: bow and edge respond independently. The DM-210 has one crash branch on the snake plus a dedicated CYMBAL trigger jack for an added cymbal.
Crash setup and troubleshooting guide ›Cable routing
- Plug the CRASH branch of the trigger snake into the Lemon crash.
- For a second cymbal, connect a 1/4" TRS cable to the module's CYMBAL trigger jack.
Module settings
- In drum-kit mode, press the MENU button.
- Use the − / + buttons to select TRIG, then press OK.
- Hit the crash to select it as the pad to adjust.
- Press OK to step to each parameter and use − / + to set the value.
- Set SENSITIVITY and THRESHOLD for the bow, and RIM GAIN for the edge zone.
- If a nearby pad cross-triggers the crash, raise XTALK CANCEL.
- Press MENU to return — the parameters save automatically.
Tips
- Bow and edge respond independently.
- XTALK CANCEL helps if a nearby pad cross-triggers the cymbal.
13" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71