Support
13" Triple-Zone Crash/Ride on Alesis Crimson III
Setup — 13" Triple-Zone Crash/Ride on Alesis Crimson III
Use as 2-zone rideYes — the 13" Triple-Zone Crash/Ride works on the Alesis Crimson III as a 2-zone ride: bow + edge.
Choose your ride zones
Plug: Ride 1
Wiring: RIDE connector on the cable snake → Ride 1 (bow/edge)
Plug the RIDE connector into the Lemon ride's Ride 1 output for bow + edge — no cymbal modification.
Ride setup and troubleshooting guide ›Cable routing
- Plug the RIDE connector on the cable snake into the ride's Ride 1 output (bow/edge).
Module settings
- Go to Kit → Menu → Trigger and select the RIDE input.
- Adjust Head (Bow) Sensi, Rim (Edge) Sensi, and Threshold until bow and edge strikes register cleanly — Rim (Edge) Sensi tunes the second zone, which carries the edge signal here.
- Assign the sounds per zone: Kit → F1 (Sound), strike the zone, then change the sound — a ride-bow voice on the bow, a ride-edge or crash voice on the second zone.
- Press the F3 (Save) button after editing — otherwise the edited data is lost after powering off.
Tips
- This is the out-of-the-box setup — no cymbal modification.
Or set it up as Bow + bell
Plug: Ride 2
Wiring: RIDE connector on the cable snake → Ride 2 (bow/bell, after the rewire)
After the one-time, reversible jumper move inside the cymbal (~10 min), Ride 2 carries bow + bell.
Rewire guide ›Cable routing
- Rewire the cymbal — move the internal red/black jumper from the Ride 1 input to the Ride 2 input.
- Plug the RIDE connector on the cable snake into the cymbal's Ride 2 output.
Module settings
- Go to Kit → Menu → Trigger and select the RIDE input.
- Adjust Head (Bow) Sensi and Threshold for the bow. The rewired bell arrives on the ring conductor — tune it with Rim (Edge) Sensi, which is the ring zone on this module. (The separate Bell Sensi parameter tunes the module's own triple-zone ride and is not the control for this setup.)
- Assign the sounds per zone: Kit → F1 (Sound), strike the zone, then change the sound — a ride-bow voice on the bow, a ride-bell voice on the second zone.
- Press the F3 (Save) button after editing — otherwise the edited data is lost after powering off.
13" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71