Support
18" Triple-Zone Crash/Ride on NUX DM-210
Setup — 18" Triple-Zone Crash/Ride on NUX DM-210
Use as 2-zone rideYes — the 18" Triple-Zone Crash/Ride works on the NUX DM-210 as a 2-zone ride: bow + edge.
Bell
Bow
Edge
Plug: Ride 1
Wiring: 1× TRS: Ride 1 (bow/edge) → Ride branch on the multi-pin trigger snake
Plug the Lemon ride's Ride 1 cable into the Ride branch for bow + edge with choke. The DM-210 ride input is 2-zone — no cymbal modification.
Cable routing
- Connect the ride's Ride 1 output (bow/edge) to the RIDE branch of the trigger snake.
Module settings
- In drum-kit mode, press the MENU button.
- Use the − / + buttons to select TRIG, then press OK.
- Hit the ride to select it as the pad to adjust.
- Press OK to step to each parameter and use − / + to set the value.
- Set SENSITIVITY and THRESHOLD for the bow, and RIM GAIN for the edge zone.
- Press MENU to return — the parameters save automatically.
Tips
- Bow and edge respond independently; grab the edge to choke.
- The DM-210 has no ride-bell voice, so bow + edge is the full 2-zone ride it can drive.
18" Triple-Zone Crash/Ride also fits 73 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71