Support

13" Triple-Zone Crash/Ride on Alesis Command

Wiring, module settings, and tips for the 13" Triple-Zone Crash/Ride when used with the Alesis Command.

Yes — the 13" Triple-Zone Crash/Ride works on the Alesis Command as a 2-zone ride: bow + edge.

Choose your ride zones

Bow + edge No modification Bell Bow Edge Plug: Ride 1 Bow + bell One-time rewire Bell Bow Edge Plug: Ride 2

Plug: Ride 1

Wiring: 1× TRS: Ride 1 (bow/edge) → RIDE connector on the cable snake

Plug the Lemon ride's Ride 1 cable into the RIDE connector for bow + edge — no cymbal modification.

Cable routing

Connect the ride's Ride 1 output (bow/edge) to the RIDE connector on the cable snake.

Module settings

Go to Kit → Menu → Trigger and select the RIDE input.
Set the pad type to a 2-zone cymbal — the Command routes Ride through the snake and does not offer a 3-zone ride pad type.
Adjust Sensitivity, Threshold, Curve, and Rim Sens for the input.
In your kit, load a ride-bow sample on the bow zone and a ride-edge or crash sample on the second zone.

Tips

This is the out-of-the-box setup — no cymbal modification.

Or set it up as Bow + bell

Plug: Ride 2

Wiring: 1× TRS: Ride 2 (bow/bell, after the rewire) → RIDE connector on the cable snake

After the one-time, reversible jumper move inside the cymbal (~10 min), the Ride 2 cable carries bow + bell.

Rewire guide ›

Cable routing

Rewire the cymbal — move the internal red/black jumper from the Ride 1 input to the Ride 2 input.
Connect a single 1/4" TRS cable from the cymbal's Ride 2 output to this module's RIDE input.

Rewire guide ›

Module settings

Go to Kit → Menu → Trigger and select the RIDE input.
Set the pad type to a 2-zone cymbal — the Command routes Ride through the snake and does not offer a 3-zone ride pad type.
Adjust Sensitivity, Threshold, Curve, and Rim Sens for the input.
In your kit, load a ride-bow sample on the bow zone and a ride-bell sample on the second zone — bow and bell hits will play through the connected cable as expected.

13" Triple-Zone Crash/Ride on Alesis Command

Setup — 13" Triple-Zone Crash/Ride on Alesis Command

Cable routing

Module settings

Tips

Or set it up as Bow + bell

Cable routing

Module settings

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

NUX

Pearl

Roland

Simmons

Yamaha

Cable routing

Module settings

Tips

Or set it up as Bow + bell

Cable routing

Module settings

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

NUX

Pearl

Roland

Simmons

Yamaha

Support contact