Support

T950 20"x12" Kick Drum on Alesis Strike MultiPad

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Alesis Strike MultiPad.

The T950 20"x12" Kick Drum is fully supported on your Alesis Strike MultiPad.

Trigger

Wiring: 1× TS → Trigger In 1 (single-zone), or a 2 Trigger split leg

Single-zone kick trigger. Trigger In 1 is the dedicated single-zone (TS) jack and suits a kick directly. Alternatively, set a dual-zone jack (2/3 or 4/5) to Type = 2 Trigger and use a TRS-to-dual-TS Y-cable so the kick shares that jack with another single-zone pad.

Cable routing

Connect a 1/4" TS cable from the Lemon kick pad to Trigger In 1.

Module settings

Press [Trigger] and select Trigger In 1 (TRIN1).
Set Sensitivity and Threshold so a firm kick triggers cleanly without false hits.
Raise Mask Time if a single kick produces a double sound from beater rebound.
Assign a kick sample to that trigger input.

Tips

A TS cable is sufficient — Trigger In 1 is single-zone.
If you need Trigger In 1 elsewhere, route the kick through a 2 Trigger jack with a Y-cable instead.

T950 20"x12" Kick Drum also fits 70 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.