Free Shipping on All Orders
Lemon

Support

T950 20"x12" Kick Drum on Alesis Command

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Alesis Command.

Setup — T950 20"x12" Kick Drum on Alesis Command

Works

The T950 20"x12" Kick Drum is fully supported on your Alesis Command.

Trigger

Wiring: 1× TS or TRS → Kick connector on the cable snake

Single-zone kick trigger via the cable snake. Only the head zone is active.

Cable routing

  1. Connect a 1/4" TS or TRS cable from the kick pad to the Kick connector on the cable snake.

Module settings

  1. Go to Kit > Menu > Trigger. Select the Kick input.
  2. Adjust Sensitivity, Threshold, and Curve.

Tips

  1. Single-zone operation — only the head zone is active.
  2. A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).