Free Shipping on All Orders
Lemon

Support

T950 20"x12" Kick Drum on Roland V31

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Roland V31.

Setup — T950 20"x12" Kick Drum on Roland V31

Works

The T950 20"x12" Kick Drum is fully supported on your Roland V31.

Trigger

Wiring: 1× TS or TRS → KICK connector on the DB-25 cable snake

Single-zone kick trigger via the cable snake. Only the head zone is active.

Cable routing

  1. Connect a 1/4" TS or TRS cable from the kick pad to the KICK connector on the DB-25 cable snake.

Module settings

  1. Press [TRIGGER] > [F1] BANK.
  2. Navigate to the KICK input.
  3. Set the trigger type to KD-10, KD-120, or KD-140 depending on your kick pad.

Tips

  1. Single-zone operation — only the head zone is active.
  2. A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).