Support

T950 20"x12" Kick Drum on Donner DED-400

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Donner DED-400.

Yes — the T950 20"x12" Kick Drum works as a full kick on the Donner DED-400: single zone.

Trigger

Wiring: 1× TS or TRS → KICK lead on the signal-connection harness

Single-zone kick trigger. Only the head zone is active.

Connect a 1/4" TS or TRS cable from the kick pad to the KICK lead on the module's signal-connection harness (the harness plugs into the module's TRIGGER INPUT port via its multi-pin parallel-port connector).

Press the MENU button, use +/- to select 2-PAD SET, and press OK to enter the pad parameter interface.
Tap the kick pad to select it, then press + / - to choose a parameter and turn the encoder to set the value (press OK to confirm).
Set Pad Sen (drum surface sensitivity, 1-6, smaller = more sensitive), Threshold (trigger threshold, 1-32), Xtalk (crosstalk threshold, 1-32), MaskS Time (masking time, 1-32), and Volume (0-127).
Press SAVE to store the settings.

Single-zone operation — only the head zone is active.
A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).

T950 20"x12" Kick Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.