Support
T950 20"x12" Kick Drum on Roland TD-07
Setup — T950 20"x12" Kick Drum on Roland TD-07
WorksYes — the T950 20"x12" Kick Drum works as a full kick on the Roland TD-07: single zone.
Trigger
Wiring: The "KIK" lead on the dedicated connection cable → kick pad
Single-zone kick trigger via the dedicated connection cable. Only the head zone is active.
Kick setup and troubleshooting guide ›Cable routing
- Plug the included dedicated connection cable's "KIK" lead into the Lemon kick pad. Its other end goes to the module's single TRIGGER INPUT connector — each lead is labeled for its pad, and the manual's instruction is simply to "connect the appropriately labeled cable to each pad".
Module settings
- Press [SETUP], select "PAD" with the cursor buttons, and press [ENTER].
- Strike the kick to select the KICK input on the "PAD" screen.
- Select "Type" with the cursor buttons and use the dial to set it to KD10 to match your kick.
- Fine-tune "Sens" (1-32) and "Threshold" (0-31) so the kick tracks evenly.
Tips
- Single-zone operation — only the head zone is active.
T950 20"x12" Kick Drum also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71