Support
T950 20"x12" Kick Drum on Roland V51
Setup — T950 20"x12" Kick Drum on Roland V51
WorksYes — the T950 20"x12" Kick Drum works as a full kick on the Roland V51: single zone.
Trigger
Wiring: KICK connector on the DB-25 cable snake → kick pad
Single-zone kick trigger via the cable snake. Only the head zone is active.
Kick setup and troubleshooting guide ›Cable routing
- Plug the KICK connector on the DB-25 cable snake into the kick pad.
Module settings
- Press the [SETUP] button.
- Use the cursor buttons to select "TRIGGER", then press [ENTER].
- Press the [F1] (BANK) button to open the TRIGGER - BANK screen.
- Select the KICK input (strike the pad or use the cursor buttons).
- Use the [-] [+] buttons or the dial to set the trigger type to the model that most closely matches your connected pad (the full trigger-type list is in the module's Data List).
- For finer control, press [F3] (BASIC) and adjust the pad's Sensitivity.
Tips
- Single-zone operation — only the head zone is active.
T950 20"x12" Kick Drum also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V71