Support
T950 20"x12" Kick Drum on Lekato PD708
Setup — T950 20"x12" Kick Drum on Lekato PD708
WorksYes — the T950 20"x12" Kick Drum works as a full kick on the Lekato PD708: single zone.
Trigger
Wiring: 1× TS → TRIGGER IN 1/2 or 3/4 (single-zone; TS grounds the jack's second trigger)
Single-zone kick trigger. Every TRIGGER IN jack is dual channel (User Manual p.7), so its ring is a live second trigger. Use a mono TS cable: its sleeve grounds that second trigger, where a TRS cable would leave it open. The kick takes one of the two jacks designated for pads.
Kick setup and troubleshooting guide ›Cable routing
- Connect a TS (mono) cable from the Lemon kick pad to TRIGGER IN 1/2 or 3/4.
Module settings
- Open the SYSTEM menu, go to PAD SETUP and step on the kick to select its trigger.
- Raise MASK TIME until beater rebound no longer sounds a second note.
- In the PAD menu, step on the kick and choose a kick sound under Wave.
Tips
- Use a TS cable, not TRS — the kick is single-zone and a TS sleeve grounds the jack's second trigger.
- Raise MASK TIME if a single kick produces a double sound.
T950 20"x12" Kick Drum also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71