Support

T950 20"x12" Kick Drum on Roland V71

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Roland V71.

Yes — the T950 20"x12" Kick Drum works as a full kick on the Roland V71: single zone.

Trigger

Wiring: 1× TS or TRS → KICK input (1/4" TRS jack)

Single-zone kick trigger. Only the head zone is active.

Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.

Press the [TRIGGER] button.
Press the [F1] (BANK) button to open the TRIGGER - BANK screen.
Select the KICK input (strike the pad or use the cursor buttons).
Use the [-] [+] buttons or the dial to set the trigger type to the model that most closely matches your connected pad (the full trigger-type list is in the module's Data List).
For finer control, press [F3] (BASIC) and adjust Sensitivity on the TRIGGER - BASIC screen.

Single-zone operation — only the head zone is active.
A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).

T950 20"x12" Kick Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.