Support

T950 20"x12" Kick Drum on GEWA G9

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the GEWA G9.

Yes — the T950 20"x12" Kick Drum works as a full kick on the GEWA G9: single zone.

Trigger

Wiring: 1× TS or TRS → KICK input (1/4" TRS jack)

Single-zone kick trigger. Only the head zone is active.

Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.

Tap the [Advanced] button and open Trigger Settings mode.
In the Input Channels list, select the Kick; its Head component is shown in the Trigger Selection panel.
In the Trigger Settings panel, adjust Gain, Threshold, High Level, Scan Time, Retrigger Mask, X-Talk, Dyn Time and Dyn Level.

Single-zone operation — only the head zone is active.
A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).

T950 20"x12" Kick Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.