Support

T950 20"x12" Kick Drum on Donner Beat Max

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Donner Beat Max.

Yes — the T950 20"x12" Kick Drum works as a full kick on the Donner Beat Max: single zone.

Trigger

Wiring: Via the stand's built-in snake — the Beat Max has no per-pad 1/4" trigger jacks, and the manual documents no pad-end connector

Single-zone kick trigger. Only the head zone is active.

The Donner Beat Max module has no individual 1/4" pad-trigger jacks. Every pad connects through the drum stand's built-in snake, which terminates in a single multi-pin "Module data base socket" on the module.
The manual documents no connection point for a standard 1/4" pad: panel item 10 is a "Module data base socket" that carries "signals/lights and other data from the drum pad", is built into the stand, and takes the module itself — not a pad. Check how your kit's own pads terminate at the stand before ordering.

From the main interface, tap EDITOR.
With CHASE ON (default), strike the kick to select it — or turn CHASE OFF and pick it from the drum drop-down.
Set Model to D_KD6 or D_KD8 to match your kick drum size.
Adjust Pad Sensitivity and Threshold for your pedal strike force.

T950 20"x12" Kick Drum also fits 74 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.