Support
T950 20"x12" Kick Drum on Donner DED-200
Setup — T950 20"x12" Kick Drum on Donner DED-200
WorksYes — the T950 20"x12" Kick Drum works as a full kick on the Donner DED-200: single zone.
Trigger
Wiring: Kick connector on the cable snake → kick pad
Single-zone kick trigger via the cable snake. Only the head zone is active.
Kick setup and troubleshooting guide ›Cable routing
- Plug the Kick connector on the cable snake into the kick pad.
Module settings
- In DRUM KIT mode, press MENU, use the encoder or UP/DOWN to select SENSITIVITY, then press ENTER.
- Press UP/DOWN to pick a parameter, tap the kick pad to select it (shown as BD), and turn the encoder to set the value.
- Set SEN (drum sensitivity, 01-06) so your normal stroke registers at full volume.
- Set THREH. (trigger threshold, 01-32) so light knocks don't trigger the pad.
- Raise XTALK (crosstalk threshold, 01-32) if a neighbouring pad false-triggers this one, and RETR. (repeat trigger, 01-32) if you get double triggers.
- Set VOL (volume, 00-127) to balance the pad against the rest of the kit.
- Press SAVE to store the settings.
Tips
- Single-zone operation — only the head zone is active.
T950 20"x12" Kick Drum also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71