Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

T950 20"x12" Kick Drum on Donner DED-300X

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Donner DED-300X.

Setup — T950 20"x12" Kick Drum on Donner DED-300X

Works

Yes — the T950 20"x12" Kick Drum works as a full kick on the Donner DED-300X: single zone.

Trigger

Wiring: KICK lead on the signal-connection harness → kick pad

Single-zone kick trigger. Only the head zone is active.

Kick setup and troubleshooting guide ›

Cable routing

  1. Plug the KICK lead on the module's signal-connection harness into the kick pad (the harness plugs into the module via its multi-pin parallel-port connector).
Kick setup and troubleshooting guide ›

Module settings

  1. MENU > SENSITIVITY > select BD (the kick) > set SEN (drum sensitivity, 01-06), THREH. (trigger threshold, 01-32), XTALK (crosstalk threshold, 01-32), RETR. (repeat trigger, 01-32), and VOL (volume, 00-127).
  2. Press SAVE to store the settings to the current PRESET.

Tips

  1. Single-zone operation — only the head zone is active.
T950 20"x12" Kick Drum also fits 76 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.