Free Shipping on All Orders
Lemon

Support

T950 20"x12" Kick Drum on Roland TD-9

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Roland TD-9.

Setup — T950 20"x12" Kick Drum on Roland TD-9

Works

The T950 20"x12" Kick Drum is fully supported on your Roland TD-9.

Trigger

Wiring: 1× TS or TRS → KICK connector on the DB-25 cable snake

Single-zone kick trigger via the cable snake. Only the head zone is active.

Cable routing

  1. Connect a 1/4" TS or TRS cable from the kick pad to the KICK connector on the DB-25 cable snake.

Module settings

  1. Press [SETUP] > Trigger > Bank.
  2. Navigate to the KICK input.
  3. Set the trigger type to a corresponding preset, like KD-10 or KD-120.

Tips

  1. Single-zone operation — only the head zone is active.
  2. A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).