Support

T950 20"x12" Kick Drum on Roland TD-6

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Roland TD-6.

Yes — the T950 20"x12" Kick Drum works as a full kick on the Roland TD-6: single zone.

Trigger

Wiring: 1× TS or TRS → KICK input (TRIGGER INPUT 1) on the rear panel

Single-zone kick trigger. Only the head zone is active.

Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.

Hold [SHIFT] and press [EDIT (SETUP)] to enter setup mode, then select TRIG BASIC.
Press the kick pedal so the display shows the KIK input.
Set the Trigger Type to KD7 (for KD-5 / KD-7 pads) or KD Type (for KD-80 / KD-120 pads) depending on your kick pad.

Single-zone operation — only the head zone is active.
A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).

T950 20"x12" Kick Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.