Support

T950 20"x12" Kick Drum on Alesis Nitro Pro

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Alesis Nitro Pro.

Yes — the T950 20"x12" Kick Drum works as a full kick on the Alesis Nitro Pro: single zone.

Trigger

Wiring: 1× TS or TRS → Kick connector on the 25-pin cable snake

Single-zone kick trigger via the cable snake. Only the head zone is active.

Connect a 1/4" TS or TRS cable from the kick pad to the Kick connector on the 25-pin cable snake.

Press the Mode button until Normal Mode (Kit, Voice, Song) is active.
Trigger the kick pad with the pedal so the module selects that input.
Press the Utility button repeatedly until SEN (Pad sensitivity) appears, then set it with the - and + buttons.
Press Utility until THR (Pad threshold) appears, then set it with the - and + buttons.
Press Save to keep the settings — otherwise they return to defaults when you power the module off.

Single-zone operation — only the head zone is active.
A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).

T950 20"x12" Kick Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.