Free Shipping on All Orders
Lemon

Support

T950 20"x12" Kick Drum on Alesis Strike Pro

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Alesis Strike Pro.

Setup — T950 20"x12" Kick Drum on Alesis Strike Pro

Works

The T950 20"x12" Kick Drum is fully supported on your Alesis Strike Pro.

Trigger

Wiring: 1× TS or TRS → KICK input (1/4" TRS jack)

Single-zone kick trigger. Only the head zone is active.

Cable routing

  1. Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.

Module settings

  1. Press Edit > Triggers (button 19). Strike the kick pad or use Note Chase to select the input.
  2. Adjust Sensitivity (00-99), Threshold (00-99), and Curve to taste.

Tips

  1. Single-zone operation — only the head zone is active.
  2. A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).