Support
13" Triple-Zone Crash/Ride on Simmons SD1250
Setup — 13" Triple-Zone Crash/Ride on Simmons SD1250
WorksYes — the 13" Triple-Zone Crash/Ride works as a full 2-zone crash on the Simmons SD1250: bow + edge.
Bow
Edge
Wiring: The CRASH1 lead of the multi-pin cable harness → cymbal, or 1× TRS → the Crash 2 jack on the right side panel
Dual-zone cymbal triggering on both crash inputs — the specifications list the crash as dual zone and the note chart gives CRASH1 and CRASH2 each a bow note and an edge note.
Crash setup and troubleshooting guide ›Cable routing
- Plug the CRASH1 lead of the multi-pin cable harness into the cymbal pad, or connect a 1/4" TRS cable from the cymbal pad to the Crash 2 stereo 1/4" input on the module's right side panel.
Module settings
- In Utility mode, press the Function button under Trigger on the Main Utility screen (Utility → Trigger F1).
- Select the pad via Follow Trigger (strike it) or Current Trigger, then set Sensitivity (1-32), Threshold, Crosstalk, Retrigger, Curve (1-4).
Tips
- Both crash inputs read bow and edge.
- The manual documents choke on the crash input — grabbing the edge of the cymbal stops it ringing.
13" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71