Support
Setup for your Roland V51
Yes — Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Roland V51.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 3-zone
- Hi-hat Continuous
Module snapshot
- Brand
- Roland
- Model
- V51
- Also known as
- V51, VAD506
Setup details by role
Snare pad 2-zone 1× TRS → SNARE connector on the DB-25 cable snake
Dual-zone triggering: head (tip) and rim (ring) respond independently via the single TRS connection. The module's snare input reads both piezo (head) and rim switch/piezo signals.
Tom pad 2-zone 1× TRS per tom → TOM1, TOM2, TOM3 connectors on the DB-25 cable snake
Dual-zone tom triggering: head (tip) and rim (ring) respond independently via the single TRS connection per tom input.
Kick pad Works 1× TS or TRS → KICK connector on the DB-25 cable snake
Single-zone kick trigger via the cable snake. Only the head zone is active.
2-zone crash 2-zone 1× TRS → CRASH1 connector on the DB-25 cable snake, or CRASH2 / AUX1/TOM4 / AUX2 / AUX3 direct jack on the rear panel
Dual-zone crash triggering: bow (tip) and edge (ring) respond independently via the single TRS connection. Choke works by grabbing the cymbal edge. The V-51 supports Roland CY-series 2-zone cymbals.
3-zone ride 3-zone 2× TRS → RD + RDB connectors on the dedicated connection cable
Full 3-zone ride — the manual instructs connecting a ride that supports three-way triggering to the RD and RDB connectors of the dedicated connection cable.
Hi-hat Continuous 1× TRS → HI-HAT connector on the DB-25 cable snake + 1× TRS → HHC connector on the DB-25 cable snake
Continuous hi-hat control via the cable snake.
