Support
T950 13"x13" Floor Tom on Roland TD-15
Setup — T950 13"x13" Floor Tom on Roland TD-15
WorksYes — the T950 13"x13" Floor Tom works as a full tom on the Roland TD-15: head + rim.
Head
Rim
Wiring: TOM1, TOM2, TOM3 connectors on the DB-25 cable snake → one per tom pad
Dual-zone tom triggering: head (tip) and rim (ring) are read over the one lead per tom input.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the TOM1, TOM2, or TOM3 connector on the DB-25 cable snake into each tom pad.
Module settings
- In the DRUM KIT screen, press [MENU], scroll to the SYSTEM icon, press [F3] (SYSTEM), select "Pad Settings", then press [F3] (ENTER).
- Press [F1] (TYPE), then strike a tom pad to select the T1, T2, or T3 input.
- Turn the value dial to set Pad Type to PD-105 or PD-85.
- Press [F2] (BASIC) and set Sensitivity and Threshold for the tom.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T950 13"x13" Floor Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71